Best Blow Guns Reviewed and Rated
A blow gun is composed of a nozzle or a tip, and is attached to air lines for the control of air discharge and/or manual actuation. They are primarily used for removal of debris, non-contact drying and cleaning, and general industrial or laboratory applications.
You will find blow guns mostly in mechanic shops, assembly lines, construction sites etc. Most blow guns are made of plastic or metal and include an ergonomic handle or grip. They also have a sturdy metallic nozzle for producing a continuous stream of compressed air.
Air blow guns with in-built fail-safe pressure mechanism can shut off automatically if the lip is blocked or the gun is dropped. Internal pressure relief valves blows off additional pressure before discharge. In the US, blow guns should meet Occupational Safety and Healthy Administration (OSHA) standards, although there are some that exceed the standards. Manufacturers indicate whether a blow gun is suitable for vacuum attachment, or high volume applications, or threaded discharge port.
To ensure that you get the most out of your blowgun, purchase a high-quality and durable blow gun that you can depend on everyday. Our selection of the best blow guns in the market from top manufacturers is second to none.
Our Top 3 Picks
Types of Air Blow Guns
Air blow guns differ in terms of actuation style and nozzle type. Standard safety straight nozzles deliver an upstream pressure equal to the dead-end pressure, so they are ideal for general-purpose applications. Flat nozzles are used for creating an air curtain or blowing-off large surfaces. Small-diameter nozzles are suitable for inserting into tight openings.
Nozzles with flexible tips can be directed to the application surface while nozzles with rubber tips do not scratch surfaces. Also straight extended nozzles are designed for difficult-to-reach surfaces. A Venturi nozzle with a large diameter contains small openings that allow the discharge to draw enough air for increased airflow. Air screens are used to reduce particle blowback.
In terms of actuation, most blow guns are actuated by the thumb and have an air supply hose that is in-line with the discharge lever. There are also triggers or pistols -style blow guns, in which the actuator is located at a right-angle to the air hose. Other blow guns are button actuated.
10 Best Blow Guns
1. Capri Tools 2 Way
With a maximum air pressure of 150 PSI, the Capri Tools 2-Way can blow water, debris, dust from all types of machinery and materials. The 150 Max PSI and the detachable extra-long (4.5”) nozzle allow you to access hard to reach areas and also get into tight spaces with ease. The tool comes with a flow control knob, which allows you to control the air flow that works best for the task at hand.
Features and Specifications
Size: 7.5 x 5 x 0.2 inches
150 Max PSI
Air Inlet: 1/4" NPT
Air Flow Control Knob
4.5" Extra Long Nozzle
Due to its excellent performance, the Capri Tools blow gun offers great value for your money. It also comes backed with a one-year warranty. Although it’s a bit expensive, its performance is top-notch.
If you’re looking for a high-quality blow gun that can help you perform multiple tasks with great efficiency, then the Capri Tool 2-way blow gun is what you are looking for. Featured at the top of the list, this blow gun can perform almost all tasks without failure; from blowing a computer to heavy machinery.
The ergonomic grip is very comfortable
Performs multiple tasks efficiently
Very powerful and sturdy
Requires less effort to operate
The valve is exposed to debris, thus allowing leaks
2. Campbell Hausfeld MP600000AV
The MP600000AV comes with a finger-activated lever design and you can check deflation
and inflation in a single action. It is compatible with various valve stems and you can use it with the portable Campbell Hausfeld 5-gallon air tank. However, it has some downsides. It is too weak to provide sufficient clamping pressure. It is also not long enough to offer adequate clamping surface to hold.
Features and Specifications
Weight 10.9 ounces
Size: 6.2 x 1.5 x 12.5 inches
3-in-1 Inflation Gun,
Locking Chuck and
2-inch Gauge, ¼” NPT
If you factor in the features into the price, the MP6000 is the compact yet most affordable tool in our list. It will help you save time and money while protecting the environment by improving you gas mileage.
If you are looking for a tool that makes it easier to complete your tire inflation tasks, then the Campbell Hausfeld is your ideal choice!
Easy to read, control, and use
Comes in three-tools in one
The hose is compatible with various valve stems
The gauge may be inaccurate
There are cases of the tool leaking air
3. Coilhose Pneumatics TYP-2500CS
The Coilhose TYP-2500CS has a very unique design with air coming out in a ring at the edge of the black part. The tip has a silver cone, which has no hole to help you direct the flow in a straight direction without turbulence. The cone also complies with OSHA standards to inject air through it and to prevent it from jamming against your skin. The trigger can travel far and you can control the variable flow while blowing-off.
On the flip side, the Coilhose TYP-2500CS comes with a plastic trigger with no fitting, which can be an uphill task to find the most compatible coupler. The main types of couplers include Universal, Industrial, Automotive, Aero, and much more. It is also advisable not to throw or drop it on the floor since the plastic trigger might crack.
Weight: 9.28 ounces
High flow tip
High volume blow gun
Made of aluminium or high impact plastic
Pressure Flow Rate: 34 cubic_feet_per_minute
Maximum Pressure: 150 pounds_per_square_inch
Meets OSHA standard 1910.242B for dead-end pressure and standard 1910.95 for noise levels
Although it is not cheap, the Coilhose TYP-2500CS has an air exhaust designed aerodynamically to pass a huge amount of air, which is efficient for blowing-off or dusting-off your equipment or surfaces. It is also well designed and constructed for improved durability.
Are you tired of hiding your blow gun from an OSHA inspector? Worry no more! The Coilhose TYP-2500CS is your perfect tool. It is ideal for home owners and professionals, looking to keep off grass and debris from their lawn mower deck, garage, or driveway. It will perform virtually anything task you can think of without fail, and it moves a significant amount of air. Buy it today and perform tasks with great efficiency!
Complies with OSHA’s noise levels and dead-end pressure
The lever action is easy and smooth
The body is sturdy
Has a powerful airstream
Ideal for both household and professional use
The handle keeps sticking
Does not come with a fitting/ male plug
4. Hiltex 31111
The Hiltex 31111 features a very strong nozzle to blow away debris and dirt from tools, truck beds, engines, and other surfaces. It has a standard NPT ¼ inch thread to connect the compressor to the assembly. It also comes with interchangeable rubber nozzle tip for comfort and to reduce hand fatigue. This tool’s PVC coated pistol trigger is thumb controlled, convenient, and easy to use. The long interchangeable extension nozzle helps in accessing hard-to-reach areas, and you can clean the tip to the gun for up-close cleaning.
Weight: 8 ounces
Dimensions: 25.2 x 4.3 x 0.7 inches
Power Source: air-powered
The Hiltex 31111 is a good value for the price as it comes with a long enough nozzle that allow you to reach inaccessible areas without having to squeeze yourself anywhere.
It is an ideal blow gun for homeowners, hobbyist, carpenters, and mechanics. With this tool, you can finish all your intended tasks without fail. The sturdy shaft and a screw-in rubber end, makes this blow gun a worthwhile purchase.
Durable and sturdy construction
Ideal for accessing deep and far places
The tube can bend easily
5. Capri Tools 21072
The 21072 5 inch blow gun is suitable for clearing debris, drying off fluids, blowing out your car, and much more. It comes with an intuitive lever design, which makes it easy to use. The rubber tip helps in increasing precision and prevents scratching. Also, the handle has an ergonomic design for an excellent grip. The air flow is directed from the gun through the nozzle with a great force. It has a bright sky blue colour, which can be spotted easily in a workshop full of grey, black, and silver –coloured tools. Another good thing with this device is that it seals up any tube you press against it, which is useful in blowing out water or dirt from your engine parts.
Weight: 6.4 ounces
Size: 11 x 6 x 1 inches
The 21072 is a great product for the price given that it is robust and come with an easy-to-pull trigger. The pressure produced is well-focused with no leaks.
If you are a car owner looking for an inexpensive yet high-performance blow gun made of US NPT 1/4" 18th inner thread, then Capri Tools 21072 5-inches blow gun is your perfect option
Does not leak
Light weight design
Comfortable to use
The tip can easily slide off
6. Legacy Blue AG7C
The Legacy AG7C comes with a compressed air work that works perfectly with no air leaks if you are using a big compressor tank. It can only handle up to 280 PSI and can easily break if used on a daily basis for a long period. With the construction being one of the main selling points, it is made from aluminium, which is lightweight and very durable. It also fits better in the hand than the Campbell Hausfeld blow gun. On the downside, the rubber tip can blow off unless you use it at 75 PSI.
Weight: 4 ounces
Dimensions: 5.5 x 2.7 x 0.8 inches
Although it is a little bit expensive, it offers great value for your money. Unlike the Chinese blow guns that are known for breaking easily even from installing the coupler fittings, this blow gun is of high quality and able to withstand extensive tasks.
This is definitely a great product for the price. If you are looking to blow out your sprinkler system for the winter or perform some other essential tasks at home, this product will serve you well and it works as expected. Its rubber tip is perfect for fitting and sealing in the blow-out valve.
Trigger is very sticky
7. Shop Fox D3281
The Shop Fox D3281 is made of lightweight and sturdy aluminium body. It has an excellent airflow, which make the blow gun stand out from the rest. It also features an optimal sized hook for easy storage. It is one of the best concentrated blow guns for clean off cars and blow dust, and for remote control hobby. Another good thing about it is that it rarely leaks.
Weight: 8.8 ounces
Dimensions: 9 x 9 x 0.9 inches
180 psi maximum pressure
Solid die-cast construction
This is the best buy since it is an inexpensive product with a solid construction and with a good output and input pressure.
It's ideal for hobbyist and professional for cleaning off assembly and cars. It works like charm with a solidly attached tip and up to 100psi supply pressure.
Stout and durable construction
Ideal for heavy-duty tasks
Has no leak
Has an easy-to-use design
If broken it is hard to be repaired
8. Milton S-148
The Milton S-148 1/4" comes with a versatile and compact rubber tip lever blow gun with a hang-up hook for storage. The tip is also threaded to keep it in place and to offer a tight fit. It meets OSHA safety standards of 150 PSI maximum inlet and a 30 PSI maximum dead end pressure. Moreover, you cannot see the casting seams on the body of the blow gun. Also the valve mechanism is composed of brass pin and nuts are of good quality and perform smoothly. On the other hand, the trigger is made of a light sheet metal and held in place with a hinge rivet.
Weight: 0.3 ounces
Dimensions: 8 x 6 x 4 inches
Polished blow gun with safety nozzle and rubber tip
Length with a rubber tip: 4-3/8", without: 3-3/8", 5/8" thick, height 2-1/2"
Maximum working pressure of 150 pounds per square inch
1/4"NPT air inlet
Come with a safety rubber nozzle
The Milton S-148 is competitively priced for the performance it offers. You can overwork it and still functions properly unlike the cheaper Chinese options that are rated for delivering low pressures.
If you are looking for a garage blow gun, Milton S-148 is your answer. It is made in the USA, and it cannot disappoint you just like other Milton products. It is uniquely constructed and designed to meet your cleaning needs whether in your workshop or home.
Built to last
Can be easily fixed if it breaks
Tip can fall off easily
9. Astro 1716
Weight: 9.6 ounces
Size: 25 x 3.2 x 1 inches
20-Inch Long Angled Nozzle
1/2-Inch Removable Rubber Tip
The 1716 works great and satisfies your needs and you definitely can’t beat the price.
If you want to blow grass trimmings off a lawn mower, under hood, belt guards or other tight places that need a long reach without getting yourself dirty, then this is your perfect fit. Don’t hesitate to purchase one.
Strong and durable
Easy to manoeuvre around
You can bend the tube to your desired shape
Can easily leak after releasing the trigger
Not ideal for heavy-duty tasks
Weight: 0.8 ounces
Size: 5.1 x 4.7 x 0.5 inches
With wonderful selection of nozzles, this tool offer great value at an affordable price. The attachments are well-made and fit properly.
If you want to inflate a giant pool toy or to keep you household electronics, saws and other tools around your shop clear of dust, the Ridgerock air blow gun with 5 nozzles is your perfect match.
Comes with 5 interchangeable nozzles
Only used for light-weight tasks
The trigger can bend easily
We have made sure that all our selected blow guns have undergone through a rigorous process so that we can come up with an accurate and detailed review of each device. Our evaluation criteria revolved around four factors including:
- Air line connection type
When it comes to cleaning using a blow gun, pressure is an important part of the equation. Most companies use the pressure produced by a blow gun as their main selling point. However, some ratings are misleading since the manufactures only state the maximum pressure their blow guns can perform at, but that does not mean it is the actual cleaning power or pressure you will receive. This is because the cleaning power is not determined by the pressure only.
A true indication of the capabilities of a blow gun is determined by its flow (measured in Litres per Minute) and Bar- the pressure produced.
A unit of pressure is measured using a bar where 1 bar is equivalent to 14 pound per square inch (PSI). In general, the higher the PSI and Lpm ratings are, the more powerful the blow gun is. Lpm and bar ratings are mutually important but if one is high while the other is low your cleaning experience can be underwhelming.
For instance, a standard car wash using a blow gun at 10Lpm can require 1820 PSI, while cleaning a driveway at 14 Lpm needs 2100PSI.
The flow rate of a blow gun (measured in Lpm) has as much pressure rating as the impact on cleaning results. The flow rate can vary depending on the cleaning level. For instance, blow gun for home applications available in most hardware has a flow rate ranging from 6 Lpm to 10Lpm. On the other hand, an industrial blow gun can offer flow rates ranging from 10 to 40Lpm.
This is clearly quite a gulf, although most home users do not need much power that industrial blow guns can provide. A balanced and a well rated blow gun in the lower, Do-It-Yourself blow guns range can offer all of the cleaning force required by most home users.
Since there are many different blow gun models on the market today, choosing the right one for the task can be pretty daunting. However, understanding the differences between them can help you get the best value for your money. Everything comes down to price and performance- everyone is looking for the best performance blow gun at the cheapest price. The best way to know the performance of different blow guns is through a simple calculation known as the cleaning effect.
The Cleaning Effect Equation: Flow (In Lpm) x Pressure (In Bar) /600
Although this calculation does not feature on manufacturer’s boxes, it is a rough and reliable method of measuring the amount of power you can expect. You can break down the calculation results using the following levels, which can tell you exactly how good a blow gun is:
– The blow gun is useable although it has no spectacular results.
1.5 – An average blow gun that can carry out medium-level tasks
2.0 – A top-class domestic blow gun.
2.3+ – A shop machine that can deliver the power you need for your DIY or home-based tasks.
The key to choosing the best blow gun is to find the right cost-to-power ratio that meets your needs. Purchasing the most powerful blow gun does not mean you get the best value: It simply means that you have a powerful blow gun that has overmatched your needs.
Evaluating the perfect blow gun for the intended job is vital. Just like an industrial cleaning staff cannot use a low-powered DIY cleaner, DIY users need not to go for raw power.
Air Line Connection Type
Blow guns use different types of air line connectors. Push-on connectors have barbed ferrules while quick-release connectors feature fittings that are attached internally. Many types of air line connectors are available. Also, there are various types of national pipe thread (NPT) connectors, in which most of them are either female or inch-based. \ NPT measurements include outside diameter (OD) and threads per inch (TPI):
- 1/4 in. NPT connectors have an OD of 0.540 in. and 18 TPI
- 1/8 in. NPT connectors have an OD of 0.405 in. and 27 TPI
- 3/8 in. NPT connectors have OD of 0.675 in. and 18 TPI
- 1/2 in. connectors have an OD of 0.840 in. and 14 TPI
There are also 10-32 NPT threads. Air line connections with a pivot or swivel are suitable for tasks that require flexible positioning.
Q1. What are the hazards of using a blow gun?
Noise coming from blasts of compressed can result in occupational hearing loss, increased accident risks, and can cause communication barriers. Particles contained in compressed or air projected into the air can cause infections, sores, or irritation if they penetrate your skin or get in contact with your eyes.
If the compressed air from the blow gun gets into your body via your nose, skin, ear, or skin, it can lead to serious injury for instance a ruptured eardrum or oesophagus, sudden or permanent pulmonary embolism or even hearing loss.
Q2. What is a safe blow gun?
In the US, Section 326 of the Regulation in respect to the occupational health and safety requires that the pressure of compressed air for cleaning should be less than 200kPa. A blow gun is “safe” if the air pressure at the nozzle does not exceed 200 kPa. When the nozzle id at the dead-end or blocked. This pressure regulation helps to reduce the risk of air or particles from penetrating through the skin.
To meet the requirement, you can utilize a blow gun with extra openings to allow air to escape when the end is blocked. Also, you can install an upstream valve that can constantly limit the air pressure to less than 200kPa.
Putting on protective equipment such as gloves, safety goggles with side shields, hearing protection, and face shields is still required. To reduce noise, you can choose models that are less noisy. A model can produce less noise and still deliver the same thrust. For protection against flying particles, choose a model that can create an air shield or one with a deflector or protective shield that keeps the air or particles from flying towards you.
Q3. What pressure should an air blow gun operate at?
Before advising on any level of pressure, the question to ask is if the operatives are fully aware on how to use a blow gun responsibly and safely.
Areas that should be examined first at all times are whether the air blow guns on site have inbuilt features and whether the right PPE types are specified and worn.
It is likely that there is need to use air blowguns at general factory so that the available energy is enough to perform the work required. Luckily, there are numerous safety type air blowguns on the market although there are still a large number of the old, non-safety models.
It is important to inspect and service blow guns regularly to ensure that they function properly, and that no safety features have been that the guns are regularly inspected and serviced to ensure that they still function correctly and that all the safety features are not overridden. Also, it is important to make sure that the guns are only used for their intended purpose. For instance, if someone has a cut or wound on the arms or hand can sustain severe injuries if a blow gun operating at six bar hits that part.
Another question worth asking is if the staffs using non-safety blow gun models are instructed on how to use them safely. As a rule of thumb, the pressure on such blow guns should be up to two bar and they should wear protective clothing.
Q4. Why does the nozzle rotate?
A blow gun’s nozzle does not require an external power to rotate. The reaction force of the air pressure causes the rotation. For instance, if you attach the hose to a water tap and spray the water vigorously, you will find that the hose end will vibrate irregularly.
Q5. Can you use compressed air greater than 30 psi for industrial applications?
For most pneumatic tools such as blow guns to operate effectively, they require 80-120 PSI. However, they must include an inbuilt air port or relief device to drop the pressure to under 30 PSI once it reaches the dead-end.
Q6. What is the perfect size of hose?
The size of a hose depends on the type of blow gun that you have. You can check your manual to find the appropriate size to use. Generally, the larger the gun, the larger the size of diameter required.